DPH Series 20 - 80/120 kVA

主な特長

Excellent Power Performance

• The industry's leading power technology offers up to 120kW within all equipped breakers in 162.8 kW/m3 which supports the top/bottom cable entry without additional cabinet to achieve the best utilization compared with its peers

• High AC-AC efficiency over 96% and ECO mode to 99% resulting in marked energy cost savings

• Green mode featuring a load aggregation function optimizes system efficiency

Ultimate Availability

• Fully modularized design and hot-swappable key modules ensure Mean Time To Repair (MTTR) close to zero without downtime risk

• Redundant components and dual CAN bus delivers highest system availability and avoids single point of failure

• Key components aging pre-warning mechanism provides proactive reliability to minimize human error and reduce downtime risk (optional)

High Manageability

• User-friendly 10" color touch screen enables easy local UPS management

• Environment information such as temperature, humidity and transmitting signals from environment sensors can be integrated into the UPS for easy monitoring via the LCD of the UPS

• If the UPS is equipped with an external battery management system, the battery information can be integrated into the UPS and monitored via the LCD of the UPS

アプリケーション

仕様

1. Model
2. DPH-80K, DPH-120K

3. ---

4. Power Rating
5. DPH-80K
   20, 40, 60, 80 kVA
   20, 40, 60, 80 kW
   Power Module Quantity: Up to 4 units
6. DPH-120K
   20, 40, 60, 80, 100, 120 kVA
   20, 40, 60, 80, 100, 120 kW
   Power Module Quantity: Up to 6 units

7. ---

8. Input
9. Nominal Voltage: 220/380Vac, 230/400Vac, 240/415Vac (3-phase, 4-wire + G)
10. Voltage Range: 305~478Vac (full load), 228~478Vac (70% load)
11. Current Harmonic Distortion: ≤ 2% *
12. Power Factor: > 0.99
13. Frequency Range: 50/60Hz

14. ---

15. Output
16. Voltage: 220/380Vac, 230/400Vac, 240/415Vac (3-phase, 4-wire + G)
17. Voltage Harmonic Distortion: ≤ 1% (linear load); ≤ 4% (non-linear load)
18. Voltage Regulation: ±1% (static)
19. Frequency : 50/60Hz
20. Overload Capability: ≤ 125%: 10 minutes; ≤ 150%: 1 minute; > 150%: 1 second

21. ---

22. Display: 10” color touch screen

23. ---

24. Interface
25. Standard
    External battery temperature detection x 4, External switch/breaker status dry contact x 4, Output dry contact x 6, Input dry contact x 4, Parallel port x 2, USB Port (Type A x 2; Type B x 1), RS232 Port x 1, Modbus Port x 1, BMS (RJ45) x 1, Ethernet x 1, SNMP Slot x 1, REPO Port x 1

26. ---

27. Conformance
28. Safety: CE (IEC62040-1, IEC62040-2 (C3: standard, C2: optional)

29. ---

30. Efficiency
31. AC-AC: > 96% (Peak efficiency)
    ECO Mode: 99%

32. ---

33. Battery
34. Nominal Voltage: ±240Vdc (default, ±180Vdc~±276Vdc configurable)
35. Charge Voltage: ±272Vdc (adjustable from 204V to 312V)
36. Protection of Battery Deep Discharge: Yes

37. ---

38. Environment
39. Operating Temperature: 0~40℃
40. Relative Humidity: 95% (non-condensing)
41. Audible Noise (at one meter): < 65dB
42. IP Protection: IP20

43. ---

44. Others
45. Parallel Redundancy and Expansion: Module and system redundancy, Maximum 8 units
46. Battery Start: Yes

47. ---

48. Physical
49. Dimensions (W x D x H): 600 x 850 x 1445mm
50. Weight - UPS System (without power modules)
    DPH-80K: 150kg
    DPH-120K: 162kg
51. Weight - 20kW Power Module (optional): 18 kg

52. ---

53. * When input voltage total harmonic distortion input is less than 1%
    
    All specifications are subject to change without prior notice.

ダウンロード

DPH Series 20 - 80/120 kVA UPS (Leaflet) / 238KB
for all available regions (English)

DPH Series 20 - 80/120 kVA UPS (User Manual) / 18.7MB