DVW-W01I2-E1 Wireless AP/Client/Gateway

Product Introduction

Features & Benefits

  • Compliant with IEEE 802.11ac wireless technology capable of up to 867Mbps data rate
  • Compliant with IEEE 802.11n wireless technology capable of up to 300Mbps data rate
  • Backward compatible with 802.11 a/b/g standard for seamless integration
  • Multiple Wireless Modes: AP, Client
  • 2 x 2 MIMO technology increases data rate
  • Proprietary ONE ROAMING industrial-grade fast roaming, seamless roaming recovery time between APs < 150ms
  • Wireless QoS(IEEE 802.11e, WMM) for video packets precedence transmission
  • Enhanced wireless security: WPA-PSK / WPA2-PSK (TKIP/AES)
  • Supports 2-port RS-232/485-to-Ethernet Device Server
  • Built-in 2-port MODBUS ASCII/RTU to MODBUS TCP Gateway
  • Built-in 1MB buffer memory avoids data loss once the connection is down
  • DHCP/BootP server for automatic IP assignment, helping build up network easily
  • SNTP (simple network time protocol) for network clock synchronization
  • Support MODBUS TCP protocol for facilitating the remote management by SCADA or with other industrial devices
  • CPU utilization displays the amount of work the CPU handles
  • Auto warning by email, Relay
Specifications
Technology
  1. Standard Compliance
  • IEEE 802.11 a/b/g/n/ac Wireless LAN
  • IEEE 802.11i Wireless Security
  • IEEE 802.3 10Base-T
  • IEEE 802.3u 100Base-T(X)
  • IEEE 802.3ab 1000Base-T

Processing Type
  • CSMA/CA

Interface
  1. Wireless
  • IEEE 802.11 a/b/g/n/ac: 2T2R
  • Antennas: 2 2dBi omni-directional, RP-SMA(male) connector
  1. Gigabit Ethernet
  • RJ45 Ports: 1 10/100/1000Base-T, auto MDI/MDI-X, auto negotiation
  1. Serial Communication
  • Serial Ports : 1 RS-232 (5-pin Terminal block), 1 RS-485 (3-pin Terminal block), 2KV isolation protection
  • Baud Rate: 2400bps to 115200bps
  • Data Bits: 7, 8
  • Parity: None, Even, Odd
  • Stop Bits: 1, 2
  • Flow Control: RTS/CTS (RS-232 only)
  • RS-232: TxD, RxD, RTS, CTS, GND
  • RS-485: D+, D-, GND
  1. Digital Inputs(DI)
  • 1 set
  • 0~+5V is OFF
  • +11V~30V is ON
  • Max. input current 6mA
  • Alarm Contacts(DO)
  • 1 relay output
  • Carry current 1A@24VDC
  1. Reset Button
  • 1set

Wireless RF
  1. RF Modulation
  • 802.11a: BPSK, QPSK, 16QAM, 64QAM with OFDM
  • 802.11b: DBPSK, DQPSK with DSSS, CCK
  • 802.11g: BPSK, QPSK, 16QAM, 64QAM with OFDM
  • 802.11n: BPSK, QPSK, 16QAM, 64QAM with MIMO-OFDM
  • 802.11ac: BPSK, QPSK, 16QAM, 64QAM, 256QAM with MIMO-OFDM
  1. Frequency Band:
  • 2.412GHz ~ 5.825GHz
  1. Operating Channels
    US(FCC):
  • 2.412GHz ~ 2.462GHz (11 channels)
  • 5.180GHz ~ 5.240GHz (4 channels), 5.745GHz ~ 5.825GHz (5 channels)
  1. EU(ETSI):
  • 2.412GHz ~ 2.472GHz (13 channels)
  • 5.180GHz ~ 5.240GHz (4 channels)
  1. China(SRRC):
  • 2.412GHz ~ 2.472GHz (13 channels)
  • 5.180GHz ~ 5.240GHz (4 channels)
  • 5.745GHz ~ 5.825GHz (5 channels)
  1. Taiwan(NCC):
  • 2.412GHz ~ 2.462GHz (11 channels)
  • 5.280GHz ~ 5.320GHz (3 channels), 5.745GHz ~ 5.825GHz(5 channels)

Management
  1. Software:
  • SSH, HTTPS, HTTP, TFTP, BootP Server/Client, DHCP Server/Client, Telnet, Syslog, ARP, MODBUS TCP, SNMP
  1. Security:
  • Security Access: SSH
  • Wireless Security: 802.11i, 64/128-bit WEP, WPA-PSK / WPA2-PSK (TKIP/AES)
  • SSID Broadcast: Enable/Disable
  1. Virtual COM Drivers:
  • Windows 2000, Windows XP, Windows Vista (32/64 bits), Windows 7 (32/64 bits), Windows 10 (32/64 bits)
  1. Configuration:
  • Web Browser, MODBUS TCP, IEXplorer utility
  1. MIB:
  • MIB II, RS-232 MIB, System Group MIB, SNMP MIB, Interface Group MIB, TCP MIB, UDP MIB, IP MIB, Delta Private MIB

Power Requirements
  • Input Voltage: 2 sets, 12 to 48VDC redundant terminal block input
  • Input Current: Max. 0.92A
  • Overload Current Protection: Present, max. input current 3A
  • Reverse Polarity Protection: Present

Physical
  • Housing: IP40 PC plastic
  • Dimensions: 110 mm(H) x 28 mm(W) x 75 mm(D)
  • Weight: 198g
  • Installation: Industrial DIN-Rail and wall mounting

Environmental Limits
  • Operating Temperature: -10℃ to 60℃(14℉ to 140℉)
  • Storage Temperature: -40℃ to 85℃(-40℉ to 185℉)
  • Ambient Relative Humidity: 5% to 95%(non-condensing)

Aoorovals
  • Safety: UL 61010, EN 62368-1
  • EMI: FCC 47 CFR Part 15 Subpart B Class A, IEC 61000-6-4, EN 55011, EN 55032(CISPR32), EN 301 489-1/17
  • EMS{EN 301 489-1/17, EN 55024(CISPR24), IEC 61000-6-2)}: IEC 61000-4-2, IEC 61000-4-3, IEC 61000-4-4, IEC 61000-4-5, IEC 61000-4-6, IEC 61000-4-8, IEC 61000-4-29
  • RF: EN 300 328, EN 301 893, NCC, SRRC, RCM FCC 47 CFR Part 15 Subpart C, E
  1. Environmental Type Tests:
  • Cold Temperature: IEC 60068-2-1
  • Dry Heat: IEC 60068-2-2
  • Humidity: IEC 60068-2-30
  • Shock: IEC 60255-21-2
  • Freefall: IEC 60068-2-32
  • Vibration: IEC 60068-2-6
  • Hi-Pot: 1.5KV